Conzerv 3360 Meters

	True RMS
	Suitable for HT & LT
	Frequency & RPM measurement
	Records run hours, off hours, and interruptions
	Generation of High-Low profiles for all power parameters with date and time
	Accuracy Class 1.0, 0.5 and 0.2
	Auto scaling from kilo to mega
	Auto scrolling
	Auto reset option
	Up to 10 years' backup of data and settings
	Built-in RTC and RS 485 port
	Portable kit option with clamp-on CTs & voltage probes
	Maximized resolution through floating decimal point
	Sharp, high visibility display
	Import/Export option
	Compact size Bezel 192 x 144mm. Depth behind bezel 110mm
	Quick & easy installation
	TOU option

The EM 3000 series meters are used to measure:

	Voltage: Phase to Phase and average
	Voltage: Phase to Neutral and average
	Voltage: Neutral to Earth
	Voltage: Phase angle
	Current: Phase-wise, Average and Neutral Current
	Current: Phase angle
	% Total Harmonic Distortion of voltage & current wave forms phase-wise

	Voltage: Phase to Phase and average, Phase to Neutral and average, Neutral to Earth
	Phase angle: Voltage and Current phase wise
	Current: Phase-wise, Average and Neutral Current
	% Total Harmonic Distortion of voltage & current wave forms phase-wise
	Monitoring of all power & energy parameters - total as well as phase wise
	4 high and 4 low profiles for instantaneous parameters with day, date and time
	Optional TOU for 8 intervals and 7 seasons for energy parameters

Tri-vector Monitor EM 3480 All features of EM 3360 meter plus. $790.00

	EB Meter cross-check
	Monitors demand parameters: Instantaneous & maximum demand, with day, date & time
	Synchronizes automatically with EB meter
	Records High-Low profile of maximum demand
	Generates Demand Profile at 19 Demand Levels for setting realistic demand targets according to user-programmed Demand Level 0 and step size
	Optional TOU for 8 intervals & 7 seasons for energy and demand parameters

Smart Demand Controller EM 3460 All features of EM 3480 meter plus more. $990.00

	User programmable upper limit and lower limit of kW or kVA parameters, essential load and prediction interval for sophisticated demand control
	Demand intervals selectable from 1 to 30 minutes
	Demand control through unique predictive technique and sliding window integration which leads to: Reduced energy losses, improved load factor & minimal disruption in operations
	3 changes over potential-free control outputs for: Predicted demand exceeds target, demand exceeds target & restore load
	Spare load and predicted demand parameters gives advance warning for planned demand control

Technical Specification

Sensing

3 Phase, 3 Wire / 4 Wire (field configurable)

Measurement

True RMS

Voltage Input

110 to 415 V nominal ( Range 80 - 500 V)

Current Input

5 or 1 Amp (Factory set ) nominal

Maximum Current

150 % of nominal

Burden on PT or CT

0.2 VA Max

Accuracy ( For V, A, PF, & all Power & Energy Parameters )

Class 1.0

+ (0.2 % of Full Scale + 0.8 % of reading + 1 digit ).

Class 0.5

+ (0.1 % of Full Scale + 0.4 % of reading + 1 digit ).

Class 0.2

+ (0.05% of Full Scale + 0.15% of reading + 1 digit ).

Accuracy of Hz

0.2 % of reading

Accuracy of ø

10 ° ( 20 % to 150 % of Full Scale )

Display update

Every 1 second ( Demand Par - 15 Secs )

Keyboard

Easy to operate sealed Membrane type

Auxiliary Supply

Factory Set, Single 50 Hz 240V ( 190 - 270 V ) or
110V ( 85 - 130V ). Burden 5VA max.

Frequency

50 Hz + 5%, 60 Hz

Power Factor

0.5 PF Lag - Unity - 0.8 PF Lead

Dimensions

Bezel 192 x 144mm.
Depth behind Bezel 110mm

Weight

1800 gms. Approximately

Panel Cut out

186 x 138mm