Electric Sub-Meter for Commercial and Industrial areas.
and three phase panel mount with enclosure.
Can Do KWH
One KWh meter for
all circuits, ready to mount, wire, and count. Up to 3 current
transformers with 1" window, ratios 50-400 amp and poly enclosure.
kits includes a Watthour meter, Ct's and enclosure. The poly
enclosure has a pre cut, gasketed front door, measures
6x6x4.5". All Can-Do Watthour meters have "on board meter
memory", in case of power failure, restores itself.
Requires 80-270VAC power to operate. Field programmable for
any circuit, Wye, Delta, Single phase, 3 phase, high leg
You can't order an incorrect Watthour meter,
Installs in about 40 -60 minutes. Includes solid core CT's
with 1" window, up to 400 amps. Setup is quick, through the
key pad ( Lockout front buttons with your security code), or
using a computer. The monitoring
and setup software is free
The Can Do
meter line is UL Registered, Listed.
Can Do Model CDKL-1
Watthour meter designed for
single phase 2 wire systems. One hot and one neutral wire.
Includes 1 enclosure, 1
solid core current transformer, up to 400 Amp, with a 1 "
window. Choose CT ratio from list below.
Can Do Model CDKL-2
Watthour Meter designed for
most residences in the USA. Any Delta system where no
neutral is present. Choose 2 CT's from the list below up
to 400 Amps with a 1" window.
||Can Do Model #CDKL-3
3 Line display and easy
field setup, lock out front buttons and security code.
Ready to mount on existing gear. Includes 3 solid core CT's
up to 400 Amps with a 1" window.
CT's are solid core type
with a 1.0" window and an 2.375" OD. 1% accurate and
included in your watthour meter selection. Specify amp ratio
when ordering: 50 Amp, 100 Amp, 200 Amp, 400 Amp
Optional Current Transformers
Conzerv Meters are no
Alternative KWH meters are listed above..