Electricity Meter-Apartments, offices, trailers. Submeter economically

Meters for electrical systems that are 120 volts to neutral have been tested by CSA to UL Standard 61010-1 and are approved for use in the USA and Canada Poly enclosure are 6x 6x 4"

Simple, Economical utility cost allocation. Digi-Watt provides Khw's, viewed directly from the counter. Select the meter by circuit type and enclosure. Nothing else to buy.

NEMA # 4 Rated

Installation Specifications

Clear Door

Solid Door

Simple, Economical utility cost allocation.

Single Phase Two Wire. 120 Volts to Neutral Model # 4411.
Contains watt module, electro-mechanical display counter , one 100 amp Current Transformer. Choose Clear or solid front.

4411/8-G Enclosure-Solid door $246.00

4411/8-F Enclosure Clear door $246.00

Single Phase Three wire. 120 Volts to Neutral

240 Volts Line to Line. Model #4011.

Contains meter electronics module, one electro-mechanical display counter and two 100 amp Current Transformers. Choose enclosure solid or clear

4011/8-G Enclosure-Solid door $265.00

4011/8-F Enclosure Clear door $265.00

Jamaica- 3 phase 4 wire 120Volts Neutral, 208/240 volt L-L, 3 phase Wye Meter

Model 4111 Measure a 208 volt, three phase electrical system with a neutral. Contains electronics module, one electro-mechanical display, three CT's. Choose the enclosure.

4111/8-G Enclosure Solid door $280.00

4411/8-F Enclosure Clear door $280.00

Cayman- Same as Jamaica Different Voltage 3 phase 4 wire 277/480V Meter for Wye system.
Model 3311. Contains meter electronics module, electro-mechanical display counter, 3 100 amp Ct's.

3311/8-G Enclosure-Solid door $350.00

3311/8-F Enclosure Clear door $350.00

Croix- Delta 3 Phase 3 wire Watt meter 208-240 volts between Legs. No Neutral.

Model 2011D Contains meter electronics module, one electro-mechanical display counter two current transformers

2011D/8-G Enclosure-Solid door $330.00

2011D/8-F Enclosure Clear door $330.00

Gettysburg- Delta 3 phase 4 wire 120.120/208 Wild Leg or stringer Meter.

Model 5111D Kit is used in three phase electrical systems where the transformer provides 208-240 Volt leg to leg, 110-120V Leg to neutral for two of the legs and 208-240 volts between the wild or straight leg and neutral. Standard 3 phase meter except the third phase has been modified to accept a voltage in the 200-250Volt range. When connecting the high voltage or wild leg (stringer leg ) is connected to the top terminal.

5111D/8-G Enclosure-Dust Proof $350.00

5111D/8-F Enclosure Splash Proof $350.00

Optional Enclosure

Optional CT's

Solid Core Transformers

200 AMP CT Solid Core 1.0" Window

Add $5.00 each CT

Caution

Serious injury can result from electrical shock. Be sure to

turn off the electrical power before installing any meter.

Fire can result from loose electrical connections.

Ensure that all electrical connections are secure. If you do not

understand theses instructions hire an experienced electrician

to install the meter for you. Help is also available from the factory

buy phone or email. In most localities a permit and inspection is

required to install the meters.

In California, Maryland and Canada, meters are regulated by the

state when used for revenue billing. Contact your local Weights

and Measures office. Special meters are available for California

that meet the states security requirements.